Premium Exposed Aggregate Concrete Sealer 20L

Concrete Preparation:
Prepare the concrete using a high-pressure cleaner to prepare the surface. If needed, use a diluted surfactant to de-grease the surface to remove any grease and oil. ensure all degreasing agent is removed and allow the surface to dry completely before sealing.

Application:
IMPORTANT: It is important to apply a small test area of sealer to ensure the sealer does not react with any previous sealers or chemicals which have been applied to the surface.
For non-porous surfaces dilute first coat of Premium Exposed Aggregate Sealer with Peninsula Products Thinners at a 50:50 ratio. This will provide better substrate wetting and improved bonding. b) Use a microfiber roller for application. Remaining coats may be applied un-diluted. 2-3 coats are recommend for most exposed aggregate surfaces.

Non-skid Application:
Peninsula Products Non-Skid Slip Resistant additive can be added to the final coat. Please refer to Peninsula Products Non-skid technical datasheet for more information.

Technical Data:
For full details on applications and properties please refer to the Product Technical Data Sheet and the SDS (Safety Data Sheet). These are available here:

Coverage:
Ranges between 3 m2/L to 10m2/L depending on substrate porosity

Re-coat Interval:
8-18 hours depending on environmental conditions

Curing Time:
Foot traffic: Minimum of 48 hours, Vehicle traffic: Minimum of 72 hours

Shelf Life:
Best used within 12 months from manufacture (refer to batch number) when stored in unopened containers. Premium Exposed Aggregate Concrete Sealer should be stored under cover, out of direct sunlight and avoiding extreme temperature changes. Do not store in temperatures below 5°C or above 35°C. Keep tightly sealed.